Prediction of Flyrock in Mine Blasting: A New Computational Intelligence Approach

Natural Resources Research - Blasting is the predominant rock fragmentation technique in civil constructions, underground and surface mines. Flyrock is the unwanted throw of rock fragments during...     

不同GPS掩星电离层剖面产品相关性分析

将在一定时空限定范围内的不同低轨卫星COSMIC、GRACE、CHAMP、FY3C的电离层掩星电子密度剖面定义为一个掩星对来对比分析不同类型掩星电离层产品。结果表明：COSMIC掩星对之间的电子密度剖面整体轮廓符合得很好，电子密度剖面主要在250 km以下和500 km以上存在较大的偏差，250~500 km的电子密度整体偏差较小，统计得到的COSMIC掩星对的电子密度参量NmF2和hmF2的相关系数能分别达到0.99和0.97，具有高度相关性，不同COSMIC卫星之间没有明显的系统误差；COSMIC、GRACE、CHAMP和FY3C不同低轨卫星间的电子密度剖面略有差异，通过统计电子密度参量NmF2和hmF2之间的相关系数，COSMIC和CHAMP的相关系数分别为0.95和0.86，COSMIC和GRACE的相关系数分别为0.98和0.94，COSMIC和FY3C的相关系数分别为0.96和0.92，不同掩星类型之间的电子密度参量之间也具有高度相关性，验证了不同卫星任务GPS掩星电离层剖面的一致性。     

贵州丹寨—三都汞矿区土壤重金属和玉米Se、Mo、Zn含量及健康风险评价

为了解贵州丹寨—三都汞矿区玉米、水稻和辣椒等农作物及土壤中重金属污染状况和食用健康风险,选取丹寨—三都汞矿区排庭、高排、王家寨、水家湾、拉峨、阳冬村、高寨、大寨等8个村镇,分析测试玉米、水稻和辣椒等农作物及土壤中重金属含量,并评价农作物中重金属对人体的健康风险。结果表明,与农作物重金属限量(GB 2762-2017、GB 15199-1994、GB 13106-1991)、欧盟、世界卫生和联合国粮农组织(WHO/FAO)标准相比,研究区土壤单因子和综合污染指数显示,研究区玉米中重金属含量低于标准,土壤受到As污染,土壤综合污染指数均值为2.17,处于中度污染。玉米中10种重金属富集系数和转移因子的大小顺序为ZnSnSeMoCdCuAsHgPbCr和ZnMoCuCdSnSeAsHgPbCr;玉米Zn、Se、Mo的富集系数和转移因子为0.2164、0.2432、0.0658和1.8051、0.1056、1.3669。健康风险评价结果表明,成人食用玉米重金属健康风险指数(HQ)值均小于1,而儿童As的HQ大于1,其余重金属HQ值小于1。     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

微塑料对海洋桡足类摄食、排泄及生殖的影响

微塑料污染目前成为海洋污染普遍关注的一个研究热点。本文在实验室内将青岛近海常见的海洋桡足类猛水蚤暴露于不同浓度的微塑料尼龙6中,研究了猛水蚤的摄食、排泄以及生殖的变化。研究结果表明,微塑料尼龙6对猛水蚤的摄食、排泄、生殖均产生不利的影响,并且存在剂量-效应关系。微塑料尼龙6对猛水蚤摄食率、滤水率、排粪率的24 h·EC 50分别为67.7、62.2、84.1 mg·L^-1,对猛水蚤抱卵率的144 h·EC 50为30.3 mg·L^-1。“饱食感”造成猛水蚤摄食率降低,从而能量和营养摄入不足可能是导致猛水蚤抱卵率降低的原因。猛水蚤对微塑料的摄食,导致猛水蚤排泄的粪便颗粒小型化,由长椭球体变为短小椭球体,可能与其粘度或物理结构的改变有关。暴露于尼龙6的猛水蚤的粪便体积和沉降速率显著低于未暴露微塑料的对照组。本实验结果对于研究微塑料对海洋桡足类以及滤食性浮游动物的生态毒理影响具有一定的帮助。     

基于航空重、磁数据的南黄海海相地层分布特征识别

基于南黄海海域实测高精度航空重、磁数据,结合航空重、磁场及物性特征,通过平均对数功率谱分析匹配滤波方法技术,对南黄海海相地层界面起伏引起的重、磁异常特征进行分离、提取,采用切线法和外奎尔法计算海相地层界面的深度,经地质和地球物理综合解释,编制了南黄海海相地层底界面、顶界面深度图及海相地层厚度图。在此基础上,初步划分了南黄海海相地层构造单元,探讨了南黄海海相地层的分布特征。苏北—南黄海坳陷区的中部坳陷和南部坳陷均发育在强磁性基底之上,构造变形较弱,海相地层保存完整,埋藏浅,厚度为4~8 km,是南黄海地区具有较大资源潜力的油气勘探区。     

渤海湾盆地歧口凹陷地层压力结构特征

深化含油气沉积盆地的压力结构研究，厘清异常压力的空间展布，对划分含油气系统、评价有利输导体系与明确勘探甜点区带具有重要的理论和实践意义。为深化渤海湾盆地富油凹陷的油气二次勘探，本文以歧口凹陷为研究对象，对其压力结构进行重点刻画。在实测地层压力的校正下，综合单井、连井和二维地震地层压力结构分析，厘清了歧口凹陷的压力结构特征，识别出4类纵向压力结构：①单超压带结构；②双超压带结构；③多超压带结构；④静水压力结构。纵向上，歧口地区存在3类纵向压力系统样式——单超压系统、双超压系统、静水常压系统。双超压系统是歧口凹陷的主要压力系统样式，广泛发育于主凹和各大次凹；从凹陷中心向盆地边缘，双超压系统逐渐向单超压系统、静水常压系统过渡。单超压系统主要分布于盆地边缘的斜坡和潜山区，如歧北高斜坡、羊三木-扣村潜山等。静水常压系统则主要分布在离深凹区更远的沈青庄潜山和埕北斜坡区域。上部超压系统和下部超压系统的顶板分别位于东营组和沙三段内部，侧向上受盆地边缘和深大断裂控制。上部超压系统的形成主要受欠压实作用控制，以歧口主凹为中心呈环带分布；而下部超压系统的形成主要受生烃作用控制，以主凹和几大次凹为中心分布。未来，下部超压系统中保存的天然气将成为歧口地区超深层天然气勘探的重点对象。     

Micromechanical analysis of cyclic and asymptotic behaviors of a granular backfill

The paper examines the mechanics and physics of granular material responses at the macroscopic and microscopic levels during both monotonic and cyclic loadings. A numerical analysis referring to a long retaining wall is conducted using a two-dimensional discrete element model representing a granular system with a free top surface. On one of the lateral boundaries referring to the retaining wall, both active and passive loadings were applied monotonically as well as cyclically. First, the development of sheared zones and classic failure wedges resulting from active and passive monotonic displacements are discussed with respect to Rankine’s and Roscoe’s solution angles. Then, a series of loading cycles were performed using slow small-amplitude displacements at different stress states chosen before the occurrence of failure along the passive monotonic stress response curve. Particular interest is focused on the ultimate asymptotic cyclic response of the granular system, the occurrence of a high-mobility (convective) zone and a detailed macroscopic and microscopic analysis. Finally, major kinematical features that are displayed during cyclic loading from different starting stresses to eventually reach the same asymptotic state were elucidated through particle vortex-like flux formations, including contact rotations. The change in material stiffness was also investigated based on the evolution of strong and weak contact networks, together with the analysis of fabric anisotropy within the entire domain, including the high-mobility zone considered separately.